Product ID:CFM-2 TOPCOAT COMP B
MSDS Date:03/01/1992
FSC:8010
NIIN:00N040369
Kit Part:Y
MSDS Number: BSDYG

Emergency Phone: 213-636-0561

Info Phone: 213-636-0561

Cage: 88167

Telephone: 908-245-2800

Cage: 88167

CYCLOALIPHATIC AMINE (EPOXY HARDENER)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MINOR BURNING TO EYES, NOSE,
THROAT AND SKIN. CHRONIC: DEFATTING TO SKIN, DIZZINESS AND NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid:INHALATION: MOVE SUBJECT TO FRESH AIR. EYES: FLUSH WITH WATER
FOR AT LEAST 15 MINUTES. CALL PHYSICIAN. SKIN: WASH WITH SOAP AND
WATER. INGESTION: DO NOT INDUCE VOMITING. CALL PHYSICIAN.

Flash Point:220F,104C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC FUMES WILL BE EVOLVED WHEN THIS
MATERIAL IS INVOLVED IN A FIRE.

Spill Release Procedures:SPREAD ABSORBENT MATERIAL OVER SPILL AND PLACE
IN CLOSED CONTAINER. REMOVE ALL SOURCES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL DRY AREA. PROTECTIVE
CLOTHING SHOULD BE WORN AS MATERIAL IS SLIGHTLY CORROSIVE.
Other Precautions:AVOID INHALATION OF HEATED VAPORS AND SPRAY MISTS.

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR IF
VENTILATION IS POOR.
Ventilation:LOCAL AND MECHANICAL (GENERAL) EXHAUST.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN CONTACT. EMERGENCY
EYE BATH AND DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:401F,205C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE STRAW LIQUID, MODERATE AMINE ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS-AVOID CONTACT WITH EPOXY RESINS IN UNCONTROLLED
CONDITIONS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:AVOID CONTACT WITH EPOXY RESINS
UNTIL READY FOR APPLICATION.

Waste Disposal Methods:DISPOSE OF IN SANITARY LANDFILL ACCORDING TO
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.